AEG Error Code E24 — Error Code E24

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

What Does AEG Error Code E24 Mean?

AEG washer: Error Code E24

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

AEG engineers identify the following root causes for fault code E24. Work through them in the order shown — they are listed from most common to least common.

1. Clogged drain filter
2. Faulty drain pump
3. Blocked drain hose
4. Malfunctioning pressure switch
5. Door interlock issue

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear AEG error code E24. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Check and clean the drain filter for any obstructions.
3. Inspect the drain hose for kinks or blockages.
4. Test the drain pump for proper operation and replace if faulty.
5. Examine the pressure switch for functionality and replace if necessary.
6. Ensure the door interlock is functioning correctly.

Required Parts

Have these AEG OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Drain filter
• Drain pump
• Drain hose
• Control board

Diagnostic Test Mode

Enter AEG diagnostic test mode: Press and hold the 'Start/Pause' and 'Spin' buttons simultaneously for 5 seconds.

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve AEG E24, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact AEG model number, including supplier links for required parts and on-call technician escalation.

Other AEG Error Codes