Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair
Quick fix:Check for any clogs in the drain pump and clear them if necessary.
What Does Bosch Error Code E57 Mean?
Bosch washer: Error Code E57
This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.
Possible Causes (5)
Bosch engineers identify the following root causes for fault code E57. Work through them in the order shown — they are listed from most common to least common.
Faulty pressure switch
Blocked drain pump
Malfunctioning control board
Wiring issue in the harness
Door interlock failure
Step-by-Step Troubleshooting (6 steps)
Follow this sequence to diagnose and clear Bosch error code E57. Power down and unplug the machine before any internal inspection.
Disconnect power before servicing.
Check the pressure switch for proper operation.
Inspect the drain pump for blockages or debris.
Examine the wiring harness for any visible damage.
Test the door interlock for continuity.
If issues persist, consider replacing the control board.
Required Parts
Have these Bosch OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.
Pressure switch
Drain pump
Control board
Diagnostic Test Mode
Enter Bosch diagnostic test mode: Press and hold the 'Start' and 'Spin' buttons simultaneously for 5 seconds.
Skill Level & Repair Time
This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.
Get AI-Powered Diagnosis
If the steps above don't resolve Bosch E57, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Bosch model number, including supplier links for required parts and on-call technician escalation.