Candy Error Code E17 — Error Code E17

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

What Does Candy Error Code E17 Mean?

Candy washer: Error Code E17

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (4)

Candy engineers identify the following root causes for fault code E17. Work through them in the order shown — they are listed from most common to least common.

1. Faulty pressure switch
2. Blocked drain pump
3. Clogged drain hose
4. Malfunctioning control board

Step-by-Step Troubleshooting (5 steps)

Follow this sequence to diagnose and clear Candy error code E17. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Check the pressure switch for proper operation.
3. Inspect the drain pump for blockages or damage.
4. Examine the drain hose for kinks or clogs.
5. Test the control board for any error signals or faults.

Required Parts

Have these Candy OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Pressure Switch
• Drain Pump
• Drain Hose

Diagnostic Test Mode

Enter Candy diagnostic test mode: Press and hold the 'Start/Pause' button and 'Spin' button simultaneously for 5 seconds.

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Candy E17, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Candy model number, including supplier links for required parts and on-call technician escalation.

Other Candy Error Codes