Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair
Quick fix:Check and clear any clogs in the drain hose.
What Does Dexter Error Code “No Drain” Mean?
Dexter washer: Pump
This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.
Possible Causes (5)
Dexter engineers identify the following root causes for fault code “No Drain”. Work through them in the order shown — they are listed from most common to least common.
Clogged drain hose
Faulty drain pump
Blocked drain filter
Malfunctioning pressure switch
Door interlock not engaging
Step-by-Step Troubleshooting (6 steps)
Follow this sequence to diagnose and clear Dexter error code “No Drain”. Power down and unplug the machine before any internal inspection.
Disconnect power before servicing.
Inspect the drain hose for kinks or clogs.
Check the drain filter for blockages.
Test the drain pump for proper operation.
Examine the pressure switch for functionality.
Ensure the door interlock is engaging correctly.
Required Parts
Have these Dexter OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.
Drain pump
Drain hose
Drain filter
Pump motor
Control board
Diagnostic Test Mode
Enter Dexter diagnostic test mode: Hold 'Medium + Start' for 5 seconds
Skill Level & Repair Time
This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.
Get AI-Powered Diagnosis
If the steps above don't resolve Dexter “No Drain”, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Dexter model number, including supplier links for required parts and on-call technician escalation.