Dexter Error Code “No Fill” — Inlet valve

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

What Does Dexter Error Code “No Fill” Mean?

Dexter washer: Inlet valve

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

Dexter engineers identify the following root causes for fault code “No Fill”. Work through them in the order shown — they are listed from most common to least common.

1. Clogged inlet filter
2. Faulty inlet valve
3. Defective pressure switch
4. Water supply issue
5. Control board malfunction

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear Dexter error code “No Fill”. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Check the water supply to ensure it is turned on.
3. Inspect and clean the inlet filter for blockages.
4. Test the inlet valve for continuity using a multimeter.
5. Examine the pressure switch for proper operation.
6. Inspect wiring connections to the control board.

Required Parts

Have these Dexter OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Inlet valve assembly
• Inlet filter
• Pressure switch
• Water supply hose

Diagnostic Test Mode

Enter Dexter diagnostic test mode: Hold 'Medium + Start' for 5 seconds

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Dexter “No Fill”, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Dexter model number, including supplier links for required parts and on-call technician escalation.

Other Dexter Error Codes