Electrolux Error Code AL01 — Electrolux AL01 Error

Service Guy AI • Washer • Medium severity • Intermediate skill

Quick fix: Check water supply valves are fully open and inlet screens are not clogged.

What Does Electrolux Error Code AL01 Mean?

AL01: Fill Timeout - Valve

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (4)

Electrolux engineers identify the following root causes for fault code AL01. Work through them in the order shown — they are listed from most common to least common.

  1. Clogged inlet screens
  2. Faulty inlet valve
  3. Low water pressure
  4. Closed supply valves

Step-by-Step Troubleshooting (7 steps)

Follow this sequence to diagnose and clear Electrolux error code AL01. Power down and unplug the machine before any internal inspection.

  1. Power off the machine and wait 30 seconds before restarting
  2. Check the error code display and note any additional indicators
  3. Verify water supply valves are fully open
  4. Check and clean inlet valve screens
  5. Test inlet valve solenoids with multimeter
  6. Verify water pressure is adequate (20-120 PSI)
  7. If problem persists, contact authorized service technician

Required Parts

Have these Electrolux OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

  • TOL-001P

Diagnostic Test Mode

Enter Electrolux diagnostic test mode: Press and hold the 'Start' and 'Pause' buttons simultaneously for 5 seconds.

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage.

Get AI-Powered Diagnosis

If the steps above don't resolve Electrolux AL01, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Electrolux model number, including supplier links for required parts and on-call technician escalation.

Other Electrolux Error Codes

APP_UPDATE — Electrolux APP_UPDATE ErrorDEX_FAIL — Electrolux DEX_FAIL ErrorCARD_BAD — Electrolux CARD_BAD ErrorH — Electrolux H ErrorE32 — Error Code E32E51 — Error Code E51E35 — Error Code E35E5E — Error Code E5E
All Electrolux Error CodesAll Error CodesService Guy AI DiagnosisOrder OEM PartsEquipment Hub

By — Founder, WashBizHub. Third-generation laundromat operator. Reviewed by the WashBizHub editorial team.

 · 

WashBizHub — Laundromat Industry Intelligence Platform. Contact · About · Privacy Policy · Terms of Service

© 2026 WashBizHub. WashBizHub is editorially independent. Where we earn affiliate revenue (e.g., AAdvantage funding referrals), it is clearly labeled.