Electrolux Error Code E24 — Error Code E24

Service Guy AI • Commercial Laundry Equipment • Medium severity • Intermediate skill • ~30 min repair

What Does Electrolux Error Code E24 Mean?

Electrolux error code E24

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

Electrolux engineers identify the following root causes for fault code E24. Work through them in the order shown — they are listed from most common to least common.

1. Clogged drain filter
2. Faulty drain pump
3. Blocked drain hose
4. Malfunctioning pressure switch
5. Door interlock issue

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear Electrolux error code E24. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Check and clean the drain filter for any obstructions.
3. Inspect the drain pump for proper operation and any blockages.
4. Examine the drain hose for kinks or clogs.
5. Test the pressure switch for functionality.
6. Verify the door interlock is engaging properly.

Required Parts

Have these Electrolux OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Drain filter
• Drain pump
• Drain hose
• Pump motor
• Control board

Diagnostic Test Mode

Enter Electrolux diagnostic test mode: Hold '90°C + Start'

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Electrolux E24, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Electrolux model number, including supplier links for required parts and on-call technician escalation.

Other Electrolux Error Codes