Electrolux Error Code E60 — Heating fault

Service Guy AI • Washer • Medium severity • Basic skill • ~45 min repair

What Does Electrolux Error Code E60 Mean?

Heating fault. Fix rate: 86%

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (4)

Electrolux engineers identify the following root causes for fault code E60. Work through them in the order shown — they are listed from most common to least common.

1. Open heating element
2. Faulty temperature sensor
3. Defective relay on control board
4. High-limit thermostat tripped

Step-by-Step Troubleshooting (7 steps)

Follow this sequence to diagnose and clear Electrolux error code E60. Power down and unplug the machine before any internal inspection.

1. 1. Disconnect power and verify zero voltage before servicing
2. 2. Note the exact error code display and any flashing patterns
3. 3. Test heating element resistance (should be 10-30 ohms)
4. 4. Check thermistor/NTC sensor readings
5. 5. Verify relay operation on control board
6. 6. Replace faulty component and test operation
7. 7. Clear error code and run test cycle

Required Parts

Have these Electrolux OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Heating element
• Temperature sensor
• Control board relay

Diagnostic Test Mode

Enter Electrolux diagnostic test mode: Hold '90°C + Start'

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 45 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Electrolux E60, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Electrolux model number, including supplier links for required parts and on-call technician escalation.

Other Electrolux Error Codes