Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair
Quick fix:Check for clogs in the drain hose and clear them if necessary.
What Does Frigidaire Error Code E25 Mean?
Frigidaire washer: Error Code E25
This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.
Possible Causes (5)
Frigidaire engineers identify the following root causes for fault code E25. Work through them in the order shown — they are listed from most common to least common.
Faulty drain pump
Clogged drain hose
Malfunctioning pressure switch
Door interlock issue
Control board malfunction
Step-by-Step Troubleshooting (6 steps)
Follow this sequence to diagnose and clear Frigidaire error code E25. Power down and unplug the machine before any internal inspection.
Disconnect power before servicing.
Inspect the drain pump for blockages or damage.
Check the drain hose for kinks or clogs.
Test the pressure switch for proper operation.
Examine the door interlock for proper engagement.
Inspect the control board for any visible damage or burnt components.
Required Parts
Have these Frigidaire OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.
Drain pump
Pressure switch
Drain hose
Control board
Diagnostic Test Mode
Enter Frigidaire diagnostic test mode: Press and hold the 'Start' and 'Pause' buttons simultaneously for 5 seconds.
Skill Level & Repair Time
This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.
Get AI-Powered Diagnosis
If the steps above don't resolve Frigidaire E25, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Frigidaire model number, including supplier links for required parts and on-call technician escalation.