GE Error Code E24 — Error Code E24

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

What Does GE Error Code E24 Mean?

GE washer: Error Code E24

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

GE engineers identify the following root causes for fault code E24. Work through them in the order shown — they are listed from most common to least common.

1. Clogged drain pump
2. Faulty pressure switch
3. Blocked drain hose
4. Door interlock issue
5. Control board malfunction

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear GE error code E24. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Inspect the drain pump for clogs or debris.
3. Check the pressure switch for proper operation.
4. Examine the drain hose for kinks or blockages.
5. Test the door interlock for proper engagement.
6. Inspect the control board for any visible damage or burnt components.

Required Parts

Have these GE OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Drain pump
• Pressure switch
• Drain hose
• Clamps
• Filter screen

Diagnostic Test Mode

Enter GE diagnostic test mode: Press and hold the Start/Pause and Power buttons simultaneously for 3 seconds.

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve GE E24, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact GE model number, including supplier links for required parts and on-call technician escalation.

Other GE Error Codes