GE Error Code E43 — Error Code E43

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

What Does GE Error Code E43 Mean?

GE washer: Error Code E43

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (4)

GE engineers identify the following root causes for fault code E43. Work through them in the order shown — they are listed from most common to least common.

1. Faulty pressure switch
2. Blocked drain pump
3. Loose wiring connection
4. Malfunctioning control board

Step-by-Step Troubleshooting (5 steps)

Follow this sequence to diagnose and clear GE error code E43. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Check the pressure switch for proper operation.
3. Inspect the drain pump for blockages or debris.
4. Examine wiring connections for looseness or damage.
5. Test the control board for faults or errors.

Required Parts

Have these GE OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Pressure switch
• Drain pump
• Wiring harness
• Control board

Diagnostic Test Mode

Enter GE diagnostic test mode: Press and hold the 'Start' and 'Pause' buttons simultaneously for 3 seconds.

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve GE E43, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact GE model number, including supplier links for required parts and on-call technician escalation.

Other GE Error Codes