Girbau Error Code A19 — Error Code A19

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

Quick fix: Check for any obstructions in the drain pump and clear them if necessary.

What Does Girbau Error Code A19 Mean?

Girbau washer: Error Code A19

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

Girbau engineers identify the following root causes for fault code A19. Work through them in the order shown — they are listed from most common to least common.

  1. Faulty pressure switch
  2. Blocked drain pump
  3. Door interlock malfunction
  4. Control board issue
  5. Incorrect water level detection

Step-by-Step Troubleshooting (5 steps)

Follow this sequence to diagnose and clear Girbau error code A19. Power down and unplug the machine before any internal inspection.

  1. Disconnect power before servicing.
  2. Inspect the pressure switch for proper operation.
  3. Check the drain pump for blockages or debris.
  4. Test the door interlock for continuity.
  5. Examine the control board for any visible damage or burnt components.

Required Parts

Have these Girbau OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

  • Pressure switch
  • Drain pump
  • Door interlock assembly

Diagnostic Test Mode

Enter Girbau diagnostic test mode: Press and hold the 'Start' and 'Stop' buttons simultaneously for 5 seconds.

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Girbau A19, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Girbau model number, including supplier links for required parts and on-call technician escalation.

Other Girbau Error Codes

A02 — Error Code A02A11 — Error Code A11A12 — Error Code A12A10 — Error Code A10E05 — Error Code E05E16 — Error Code E16E18 — Error Code E18F03 — Error Code F03
All Girbau Error CodesAll Error CodesService Guy AI DiagnosisOrder OEM PartsEquipment Hub

Fix it, then think bigger

Join Doctrine Academy12-chapter acquisition doctrine + 1 year of Pro included — $499.See the CLEANBI grade for your marketScore any address on 17 demand factors — free, 30 seconds, no signup.Diagnose this with Service Guy AIStep-by-step repair guidance for this error code — free.

By — Founder, WashBizHub. Third-generation laundromat operator. Reviewed by the WashBizHub editorial team.

 · 

WashBizHub — Laundromat Industry Intelligence Platform. Contact · About · Privacy Policy · Terms of Service

© 2026 WashBizHub. WashBizHub is editorially independent. Where we earn affiliate revenue (e.g., AAdvantage funding referrals), it is clearly labeled.