Girbau Error Code E13 — Error Code E13

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

What Does Girbau Error Code E13 Mean?

Girbau washer: Error Code E13

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

Girbau engineers identify the following root causes for fault code E13. Work through them in the order shown — they are listed from most common to least common.

1. Faulty pressure switch preventing proper water level detection.
2. Clogged drain pump affecting water drainage.
3. Malfunctioning control board causing communication errors.
4. Blocked drain hose restricting water flow.
5. Door interlock not engaging properly.

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear Girbau error code E13. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Inspect the pressure switch for proper operation and replace if necessary.
3. Check the drain pump for blockages and clean or replace as needed.
4. Examine the control board for any visible damage or burnt components.
5. Ensure the drain hose is not kinked or clogged.
6. Test the door interlock for proper engagement and replace if faulty.

Required Parts

Have these Girbau OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Pressure switch
• Drain pump
• Control board
• Wiring harness

Diagnostic Test Mode

Enter Girbau diagnostic test mode: Press and hold the 'Start' and 'Extra Rinse' buttons simultaneously for 5 seconds.

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Girbau E13, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Girbau model number, including supplier links for required parts and on-call technician escalation.

Other Girbau Error Codes