Gorenje Error Code E13 — Error Code E13

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

Quick fix: Check and clear any blockages in the drain hose.

What Does Gorenje Error Code E13 Mean?

Gorenje washer: Error Code E13

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (4)

Gorenje engineers identify the following root causes for fault code E13. Work through them in the order shown — they are listed from most common to least common.

  1. Faulty pressure switch
  2. Clogged drain pump
  3. Blocked drain hose
  4. Malfunctioning control board

Step-by-Step Troubleshooting (5 steps)

Follow this sequence to diagnose and clear Gorenje error code E13. Power down and unplug the machine before any internal inspection.

  1. Disconnect power before servicing.
  2. Check the pressure switch for proper operation.
  3. Inspect the drain pump for blockages or damage.
  4. Examine the drain hose for kinks or clogs.
  5. Test the control board for any visible signs of damage.

Required Parts

Have these Gorenje OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

  • Pressure switch
  • Drain pump
  • Drain hose
  • Control board

Diagnostic Test Mode

Enter Gorenje diagnostic test mode: Press and hold the 'Start' and 'Pause' buttons simultaneously for 5 seconds.

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Gorenje E13, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Gorenje model number, including supplier links for required parts and on-call technician escalation.

Other Gorenje Error Codes

E12 — Error Code E12E16 — Error Code E16E19 — Error Code E19E9 — Error Code E9E15 — Error Code E15E11 — Error Code E11E20 — Error Code E20E1 — Error Code E1
All Gorenje Error CodesAll Error CodesService Guy AI DiagnosisOrder OEM PartsEquipment Hub

By — Founder, WashBizHub. Third-generation laundromat operator. Reviewed by the WashBizHub editorial team.

 · 

WashBizHub — Laundromat Industry Intelligence Platform. Contact · About · Privacy Policy · Terms of Service

© 2026 WashBizHub. WashBizHub is editorially independent. Where we earn affiliate revenue (e.g., AAdvantage funding referrals), it is clearly labeled.