IPSO Error Code Drain — Pump

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

What Does IPSO Error Code Drain Mean?

IPSO washer: Pump

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

IPSO engineers identify the following root causes for fault code Drain. Work through them in the order shown — they are listed from most common to least common.

1. Clogged drain hose
2. Faulty drain pump
3. Blocked filter
4. Malfunctioning pressure switch
5. Door interlock issue

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear IPSO error code Drain. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Inspect the drain hose for kinks or clogs.
3. Check the drain pump for proper operation.
4. Clean or replace the filter if blocked.
5. Test the pressure switch for functionality.
6. Ensure the door interlock is engaging properly.

Required Parts

Have these IPSO OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Drain pump
• Drain hose
• Filter
• Pump motor
• Control board

Diagnostic Test Mode

Enter IPSO diagnostic test mode: Press 'Delicates + Cold' buttons simultaneously

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve IPSO Drain, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact IPSO model number, including supplier links for required parts and on-call technician escalation.

Other IPSO Error Codes