LG Error Code EC_00 — Card reader comm

Service Guy AI • Dryer • Medium severity • Intermediate skill • ~30 min repair

Quick fix: Check and reseat the card reader connection to ensure a proper fit.

What Does LG Error Code EC_00 Mean?

LG dryer: Card reader comm

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

LG engineers identify the following root causes for fault code EC_00. Work through them in the order shown — they are listed from most common to least common.

  1. Faulty card reader connection
  2. Defective control board
  3. Damaged wiring harness
  4. Corroded contacts on the card reader
  5. Software glitch in the control system

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear LG error code EC_00. Power down and unplug the machine before any internal inspection.

  1. Disconnect power before servicing the dryer.
  2. Inspect the card reader connection for loose or damaged wires.
  3. Check the wiring harness for any signs of wear or damage.
  4. Examine the control board for any visible signs of damage or burn marks.
  5. Clean the contacts on the card reader to remove any corrosion.
  6. Perform a software reset if applicable.

Required Parts

Have these LG OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

  • Card reader
  • Control board
  • Wiring harness
  • Connector terminal

Diagnostic Test Mode

Enter LG diagnostic test mode: Hold 'Rinse+Spin + Power' for 3 seconds

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve LG EC_00, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact LG model number, including supplier links for required parts and on-call technician escalation.

Other LG Error Codes

tcL — Tub Clean Reminder (Not Error)Alrm — Vault switchE:HC — Heater circuit (gas)OP — Sail switch / thermistorTemp — SensorF55 — Not dry after 180 minDH — Error Code DHd5 — Error Code d5
All LG Error CodesAll Error CodesService Guy AI DiagnosisOrder OEM PartsEquipment Hub

By — Founder, WashBizHub. Third-generation laundromat operator. Reviewed by the WashBizHub editorial team.

 · 

WashBizHub — Laundromat Industry Intelligence Platform. Contact · About · Privacy Policy · Terms of Service

© 2026 WashBizHub. WashBizHub is editorially independent. Where we earn affiliate revenue (e.g., AAdvantage funding referrals), it is clearly labeled.