LG Error Code LE1 — Error Code LE1

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

Quick fix: Ensure the door is fully closed and try restarting the washer.

What Does LG Error Code LE1 Mean?

LG washer: Error Code LE1

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

LG engineers identify the following root causes for fault code LE1. Work through them in the order shown — they are listed from most common to least common.

  1. Faulty door interlock preventing the washer from starting
  2. Blocked drain pump causing water to not drain properly
  3. Malfunctioning pressure switch affecting water level detection
  4. Issues with the control board affecting communication
  5. Wiring issues or loose connections within the machine

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear LG error code LE1. Power down and unplug the machine before any internal inspection.

  1. Disconnect power before servicing the washer.
  2. Inspect the door interlock for proper operation and replace if faulty.
  3. Check the drain pump for blockages and clean or replace as necessary.
  4. Test the pressure switch for functionality and replace if defective.
  5. Examine wiring connections for any loose or damaged wires.
  6. Reconnect power and test the machine after each step.

Required Parts

Have these LG OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

  • Door interlock switch
  • Drain pump
  • Pressure switch
  • Control board

Diagnostic Test Mode

Enter LG diagnostic test mode: Hold 'Rinse+Spin + Power' for 3 seconds

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve LG LE1, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact LG model number, including supplier links for required parts and on-call technician escalation.

Other LG Error Codes

tcL — Tub Clean Reminder (Not Error)Alrm — Vault switchE:HC — Heater circuit (gas)OP — Sail switch / thermistorTemp — SensorF55 — Not dry after 180 minDH — Error Code DHd5 — Error Code d5
All LG Error CodesAll Error CodesService Guy AI DiagnosisOrder OEM PartsEquipment Hub

By — Founder, WashBizHub. Third-generation laundromat operator. Reviewed by the WashBizHub editorial team.

 · 

WashBizHub — Laundromat Industry Intelligence Platform. Contact · About · Privacy Policy · Terms of Service

© 2026 WashBizHub. WashBizHub is editorially independent. Where we earn affiliate revenue (e.g., AAdvantage funding referrals), it is clearly labeled.