Maytag Commercial Error Code F21 — Maytag Commercial F21 Error

Service Guy AI • Washer • Medium severity • Basic skill

What Does Maytag Commercial Error Code F21 Mean?

Slow Drain (>8 minutes)

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (4)

Maytag Commercial engineers identify the following root causes for fault code F21. Work through them in the order shown — they are listed from most common to least common.

1. Clogged drain pump filter
2. Blocked drain hose
3. Faulty drain pump motor
4. Debris in pump impeller

Step-by-Step Troubleshooting (7 steps)

Follow this sequence to diagnose and clear Maytag Commercial error code F21. Power down and unplug the machine before any internal inspection.

1. Power off the machine and wait 30 seconds before restarting
2. Check the error code display and note any additional indicators
3. Locate and clean the drain pump filter
4. Check drain hose for kinks or blockages
5. Verify drain pump impeller spins freely
6. Test drain pump motor with multimeter
7. If problem persists, contact authorized service technician

Required Parts

Have these Maytag Commercial OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Drain pump filter
• Drain pump motor

Diagnostic Test Mode

Enter Maytag Commercial diagnostic test mode: Press and hold the 'Start' and 'Pause/Cancel' buttons simultaneously for 3 seconds.

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage.

Get AI-Powered Diagnosis

If the steps above don't resolve Maytag Commercial F21, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Maytag Commercial model number, including supplier links for required parts and on-call technician escalation.

Other Maytag Commercial Error Codes