Maytag Error Code F24 — Error Code F24

Service Guy AI • Commercial Laundry Equipment • Medium severity • Intermediate skill • ~30 min repair

What Does Maytag Error Code F24 Mean?

Maytag error code F24

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

Maytag engineers identify the following root causes for fault code F24. Work through them in the order shown — they are listed from most common to least common.

1. Faulty pressure switch
2. Clogged drain pump
3. Door interlock malfunction
4. Control board issue
5. Wiring problem

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear Maytag error code F24. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Inspect the pressure switch for proper operation.
3. Check the drain pump for blockages and clean if necessary.
4. Test the door interlock for continuity.
5. Examine the control board for any visible damage or burnt components.
6. Inspect wiring connections for any loose or damaged wires.

Required Parts

Have these Maytag OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Pressure switch
• Drain pump
• Door interlock
• Wiring harness
• Control board

Diagnostic Test Mode

Enter Maytag diagnostic test mode: Press 'Soil + Spin' 3 times fast

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Maytag F24, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Maytag model number, including supplier links for required parts and on-call technician escalation.

Other Maytag Error Codes