Primus Error Code New — Primus New Error

Service Guy AI • Washer • Medium severity • Basic skill

What Does Primus Error Code New Mean?

F6: Fill Timeout - Inlet

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (4)

Primus engineers identify the following root causes for fault code New. Work through them in the order shown — they are listed from most common to least common.

1. Clogged inlet screens
2. Faulty inlet valve
3. Low water pressure
4. Closed supply valves

Step-by-Step Troubleshooting (7 steps)

Follow this sequence to diagnose and clear Primus error code New. Power down and unplug the machine before any internal inspection.

1. Power off the machine and wait 30 seconds before restarting
2. Check the error code display and note any additional indicators
3. Verify water supply valves are fully open
4. Check and clean inlet valve screens
5. Test inlet valve solenoids with multimeter
6. Verify water pressure is adequate (20-120 PSI)
7. If problem persists, contact authorized service technician

Required Parts

Have these Primus OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• P6-017P

Diagnostic Test Mode

Enter Primus diagnostic test mode: Press and hold the 'Start' and 'Stop' buttons simultaneously for 5 seconds.

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage.

Get AI-Powered Diagnosis

If the steps above don't resolve Primus New, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Primus model number, including supplier links for required parts and on-call technician escalation.

Other Primus Error Codes