Rowe Error Code REJECT_H — Reject Bill (Mag Head 2)

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

What Does Rowe Error Code REJECT_H Mean?

Rowe washer: Reject Bill (Mag Head 2)

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

Rowe engineers identify the following root causes for fault code REJECT_H. Work through them in the order shown — they are listed from most common to least common.

1. Dirty or faulty magnetic head 2
2. Bill jam in the acceptor
3. Incorrect bill type inserted
4. Poor connection in wiring harness
5. Control board malfunction

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear Rowe error code REJECT_H. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Inspect magnetic head 2 for dirt or damage.
3. Check for any jammed bills in the acceptor.
4. Verify that the correct bill type is being used.
5. Examine wiring connections for any loose or damaged wires.
6. Test the control board for proper functionality.

Required Parts

Have these Rowe OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Magnetic Head 2
• Bill Acceptor Assembly
• Cleaning Kit
• Control Board

Diagnostic Test Mode

Enter Rowe diagnostic test mode: Press and hold the 'Test' button while powering on the machine.

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Rowe REJECT_H, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Rowe model number, including supplier links for required parts and on-call technician escalation.

Other Rowe Error Codes