Sharp Error Code E13 — Error Code E13

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

What Does Sharp Error Code E13 Mean?

Sharp washer: Error Code E13

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

Sharp engineers identify the following root causes for fault code E13. Work through them in the order shown — they are listed from most common to least common.

1. Blocked drain pump
2. Faulty pressure switch
3. Clogged drain hose
4. Door interlock malfunction
5. Control board issue

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear Sharp error code E13. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Inspect the drain pump for blockages and clean if necessary.
3. Check the pressure switch for proper operation and replace if faulty.
4. Examine the drain hose for clogs and clear any obstructions.
5. Test the door interlock for functionality and replace if defective.
6. Inspect the control board for any visible damage or burnt components.

Required Parts

Have these Sharp OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Drain pump
• Pressure switch
• Drain hose
• Control board

Diagnostic Test Mode

Enter Sharp diagnostic test mode: Press and hold the Start and Pause buttons simultaneously while turning on the power.

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Sharp E13, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Sharp model number, including supplier links for required parts and on-call technician escalation.

Other Sharp Error Codes