Smeg Error Code E13 — Error Code E13

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

What Does Smeg Error Code E13 Mean?

Smeg washer: Error Code E13

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (4)

Smeg engineers identify the following root causes for fault code E13. Work through them in the order shown — they are listed from most common to least common.

1. Faulty pressure switch
2. Blocked drain pump
3. Faulty control board
4. Door interlock malfunction

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear Smeg error code E13. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Check the pressure switch for proper operation.
3. Inspect the drain pump for blockages or damage.
4. Test the door interlock for continuity.
5. Examine the control board for any visible signs of damage.
6. Reconnect power and run a test cycle.

Required Parts

Have these Smeg OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Pressure switch
• Drain pump
• Control board

Diagnostic Test Mode

Enter Smeg diagnostic test mode: Press and hold the Start/Pause button and the Temperature button simultaneously.

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Smeg E13, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Smeg model number, including supplier links for required parts and on-call technician escalation.

Other Smeg Error Codes