Speed Queen Error Code E:00 — IR comm fault (micro-wand, 1995+)

Service Guy AI • Dryer • Medium severity • Intermediate skill • ~30 min repair

What Does Speed Queen Error Code E:00 Mean?

Legacy Speed Queen/Huebsch (1990-2005): IR comm fault (micro-wand, 1995+)

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

Speed Queen engineers identify the following root causes for fault code E:00. Work through them in the order shown — they are listed from most common to least common.

1. Faulty micro-wand connection or wiring
2. Defective control board
3. Interference from nearby electronic devices
4. Dirty or obstructed micro-wand sensor
5. Loose or damaged connectors

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear Speed Queen error code E:00. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing the dryer.
2. Inspect the micro-wand connection for any loose or damaged wires.
3. Check the control board for any visible signs of damage or burnt components.
4. Ensure there are no electronic devices nearby that could cause interference.
5. Clean the micro-wand sensor to remove any dirt or obstructions.
6. Reconnect all connectors securely and test the machine.

Required Parts

Have these Speed Queen OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Micro-wand assembly
• Control board

Diagnostic Test Mode

Enter Speed Queen diagnostic test mode: Press 'Delicates + Cold' buttons simultaneously

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Speed Queen E:00, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Speed Queen model number, including supplier links for required parts and on-call technician escalation.

Other Speed Queen Error Codes