Speed Queen Error Code E Ub (2010–2025) — Unbalance (rare on top-load)

Service Guy AI • Washer • Low severity • Intermediate skill • ~30 min repair

Quick fix: Redistribute the load in the drum to see if the error clears.

What Does Speed Queen Error Code E Ub (2010–2025) Mean?

Speed Queen washer: Unbalance (rare on top-load)

This is a low-severity notification. The machine will keep operating, but the underlying condition will worsen if ignored.

Possible Causes (5)

Speed Queen engineers identify the following root causes for fault code E Ub (2010–2025). Work through them in the order shown — they are listed from most common to least common.

  1. Load is unevenly distributed in the drum.
  2. Worn or damaged suspension springs affecting balance.
  3. Faulty pressure switch not detecting water level correctly.
  4. Improper leveling of the washer causing instability.
  5. Foreign objects trapped in the drum or pump.

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear Speed Queen error code E Ub (2010–2025). Power down and unplug the machine before any internal inspection.

  1. Disconnect power before servicing.
  2. Check the load in the drum and redistribute items evenly.
  3. Inspect the suspension springs for wear or damage.
  4. Verify the washer is level using a bubble level and adjust the feet as necessary.
  5. Examine the pressure switch for proper operation and replace if faulty.
  6. Check for foreign objects in the drum or drain pump.

Required Parts

Have these Speed Queen OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

  • Suspension spring
  • Pressure switch
  • Balance ring
  • Drum bearing

Diagnostic Test Mode

Enter Speed Queen diagnostic test mode: Press 'Delicates + Cold' buttons simultaneously

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Speed Queen E Ub (2010–2025), run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Speed Queen model number, including supplier links for required parts and on-call technician escalation.

Other Speed Queen Error Codes

New — Speed Queen New Error4-3 — Speed Queen 4-3 ErrorUb — Unbalanced loadAL02 — Speed Queen AL02 ErrorE:PS — Pressure sensorBT_OFF — Speed Queen BT_OFF ErrorCARD_DECLINED — Speed Queen CARD_DECLINED ErrorE:LS — Lint sensor
All Speed Queen Error CodesAll Error CodesService Guy AI DiagnosisOrder OEM PartsEquipment Hub

By — Founder, WashBizHub. Third-generation laundromat operator. Reviewed by the WashBizHub editorial team.

 · 

WashBizHub — Laundromat Industry Intelligence Platform. Contact · About · Privacy Policy · Terms of Service

© 2026 WashBizHub. WashBizHub is editorially independent. Where we earn affiliate revenue (e.g., AAdvantage funding referrals), it is clearly labeled.