Speed Queen Error Code “No Fill” — Inlet valve stuck / screens clogged

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

What Does Speed Queen Error Code “No Fill” Mean?

Speed Queen washer: Inlet valve stuck / screens clogged

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

Speed Queen engineers identify the following root causes for fault code “No Fill”. Work through them in the order shown — they are listed from most common to least common.

1. Inlet valve is stuck in the closed position.
2. Water supply is turned off or has low pressure.
3. Screens in the inlet valve are clogged with debris.
4. Faulty pressure switch preventing water fill.
5. Control board malfunction affecting valve operation.

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear Speed Queen error code “No Fill”. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing the washer.
2. Check if the water supply is turned on and has adequate pressure.
3. Inspect and clean the inlet valve screens for any blockages.
4. Test the inlet valve for proper operation using a multimeter.
5. Check the pressure switch for functionality and replace if necessary.
6. Examine the control board for any visible damage or faults.

Required Parts

Have these Speed Queen OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Inlet valve assembly
• Inlet valve screens

Diagnostic Test Mode

Enter Speed Queen diagnostic test mode: Press 'Delicates + Cold' buttons simultaneously

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Speed Queen “No Fill”, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Speed Queen model number, including supplier links for required parts and on-call technician escalation.

Other Speed Queen Error Codes