Whirlpool Error Code F06 — Error Code F06

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

What Does Whirlpool Error Code F06 Mean?

Whirlpool washer: Error Code F06

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

Whirlpool engineers identify the following root causes for fault code F06. Work through them in the order shown — they are listed from most common to least common.

1. Faulty door interlock
2. Malfunctioning control board
3. Defective pressure switch
4. Blocked drain pump
5. Wiring issue in the control circuit

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear Whirlpool error code F06. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Inspect the door interlock for proper operation and replace if faulty.
3. Check the control board for any visible damage or burnt components.
4. Test the pressure switch for continuity and replace if defective.
5. Examine the drain pump for blockages and clear any obstructions.
6. Inspect wiring connections for any signs of wear or damage.

Required Parts

Have these Whirlpool OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Door interlock switch
• Control board
• Pressure switch

Diagnostic Test Mode

Enter Whirlpool diagnostic test mode: Press 'Soil + Spin' 3 times fast

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Whirlpool F06, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Whirlpool model number, including supplier links for required parts and on-call technician escalation.

Other Whirlpool Error Codes