Gorenje Error Code E18 — Error Code E18

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

What Does Gorenje Error Code E18 Mean?

Gorenje washer: Error Code E18

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

Gorenje engineers identify the following root causes for fault code E18. Work through them in the order shown — they are listed from most common to least common.

1. Clogged drain filter preventing proper drainage.
2. Faulty drain pump not functioning correctly.
3. Blocked drain hose restricting water flow.
4. Malfunctioning pressure switch not detecting water levels.
5. Control board issue affecting error code reporting.

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear Gorenje error code E18. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Check and clean the drain filter for any obstructions.
3. Inspect the drain pump for proper operation and any blockages.
4. Examine the drain hose for kinks or clogs.
5. Test the pressure switch for continuity and proper function.
6. Inspect the control board for any visible damage or burnt components.

Required Parts

Have these Gorenje OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Drain filter
• Drain pump
• Drain hose

Diagnostic Test Mode

Enter Gorenje diagnostic test mode: Press and hold the 'Start/Pause' and 'Spin' buttons simultaneously for 5 seconds.

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Gorenje E18, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Gorenje model number, including supplier links for required parts and on-call technician escalation.

Other Gorenje Error Codes