Whirlpool Error Code F57 — Error Code F57

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

What Does Whirlpool Error Code F57 Mean?

Whirlpool washer: Error Code F57

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (4)

Whirlpool engineers identify the following root causes for fault code F57. Work through them in the order shown — they are listed from most common to least common.

1. Faulty pressure switch preventing proper water level detection.
2. Blocked drain pump causing water to not drain properly.
3. Malfunctioning control board affecting communication between components.
4. Door interlock issue preventing the washer from starting.

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear Whirlpool error code F57. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Inspect the pressure switch for any signs of damage or blockage.
3. Check the drain pump for clogs or obstructions.
4. Examine the control board for any visible signs of damage or burnt components.
5. Test the door interlock for proper operation and ensure it is securely closed.
6. Reconnect power and run a diagnostic cycle to see if the error persists.

Required Parts

Have these Whirlpool OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Pressure switch
• Drain pump
• Control board
• Wire harness
• Water level sensor

Diagnostic Test Mode

Enter Whirlpool diagnostic test mode: Press 'Soil + Spin' 3 times fast

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Whirlpool F57, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Whirlpool model number, including supplier links for required parts and on-call technician escalation.

Other Whirlpool Error Codes