Whirlpool Error Code HC — Error Code HC

Service Guy AI • Washer • Medium severity • Intermediate skill • ~30 min repair

What Does Whirlpool Error Code HC Mean?

Whirlpool washer: Error Code HC

This is a medium-severity fault. The machine may complete the current cycle but is signalling a problem you should resolve before it escalates.

Possible Causes (5)

Whirlpool engineers identify the following root causes for fault code HC. Work through them in the order shown — they are listed from most common to least common.

1. Faulty pressure switch
2. Clogged drain pump
3. Blocked drain hose
4. Door interlock issue
5. Control board malfunction

Step-by-Step Troubleshooting (6 steps)

Follow this sequence to diagnose and clear Whirlpool error code HC. Power down and unplug the machine before any internal inspection.

1. Disconnect power before servicing.
2. Inspect the pressure switch for proper operation.
3. Check the drain pump for clogs or obstructions.
4. Examine the drain hose for kinks or blockages.
5. Test the door interlock for proper engagement.
6. Inspect the control board for any visible damage.

Required Parts

Have these Whirlpool OEM part numbers ready before starting the repair. AAdvantage Laundry Systems carries verified parts for every code in this database.

• Pressure switch
• Drain pump
• Drain hose
• Control board

Diagnostic Test Mode

Enter Whirlpool diagnostic test mode: Press 'Soil + Spin' 3 times fast

Skill Level & Repair Time

This repair is appropriate for an experienced laundromat owner or in-house technician. You should be comfortable removing service panels, reading wiring diagrams, and using a multimeter to test continuity and voltage. Plan for approximately 30 minutes of active repair time once parts are on hand.

Get AI-Powered Diagnosis

If the steps above don't resolve Whirlpool HC, run a free Service Guy AI diagnosis. Upload a photo of the error display and get an AI-generated repair plan tied to your exact Whirlpool model number, including supplier links for required parts and on-call technician escalation.

Other Whirlpool Error Codes